![Us robotics usr 9108 ip address search Us robotics usr 9108 ip address search](/uploads/1/2/5/3/125394394/740130326.jpg)
Change US-Robotics USR5461 Default IP Address The routers take the first possible address (192.168.0.1), change it to 192.168.0.99 or something similar to that, which you can easily remember. You can change the IP addresses, that are used to a group reserved for private networks.
Robotics has a long-long standing reputation of delivery high-quality analog modems for dial-up Internet access. In fact, U.S. Robotics created many of the standards used in dial-up technology that many other companies subsequently adopted and integrated into their products.
3Com acquired U.S. Robotics in 1997, and subsequently spun off the modem company in June 2000. Robotics added a line of high-end wired and wireless routers to its product line in the early and mid-2000s to complement its line of modems. The company no longer produces routers, but thousands of die-hard USR fans still use their router products to connect to the Web.
Robotics routers are compatible with virtually all DSL and cable modems. Tips. If you connected your PC to the cable modem before adding the U.S.
Robotics modem, you can simply disconnect the computer from the modem and plug the RJ-45 Ethernet cable you used for that connection into the WAN port on the rear of the router. In most cases, cable modem users access the Web with a dynamic IP address. However, if your cable company assigned you a static IP, click the “Static IP Address” option in the WAN section of the control panel. You must enter the static IP address you received from the cable company along with the WAN Gateway, Primary DNS and Secondary DNS addresses.
You should receive this information from the cable company when the technician comes to install your cable modem access. You should enable a router password after you configure your cable modem connection. To do this, click the “Security” link in the router control panel, and then click “Access Control.” Enter a new password for the router in the “New Password” field, and then type it again in the “Confirm Password” field. Save the password settings and reboot the router. When you attempt to log in to the router configuration page again, the router prompts you for the new password.
![Us Robotics Usr 9108 Ip Address Us Robotics Usr 9108 Ip Address](/uploads/1/2/5/3/125394394/551266886.png)
I have successfully configured an Apache2 webserver on one of my computers. Local access through HTTPS is working.However, I cannot convince my router (a USR 9108) to allow traffic. I have tried pretty much any option that allows me to redirect / allow traffic (Virtual Server, IP Inbound Filtering, DMZ), but nothing seems to work in order to allow access to my HTTPS server through (I know my ISP doesn't block port 443 for a fact). Neither iptables seems to block any traffic.Am I missing something? Any suggestions?Thanks in advance!